Posts Tagged ‘engine’

Will a Gas Engine Run on RC Racing Fuel? Let's find out!

Will a Gas Engine Run on RC Racing Fuel? Let’s find out!

Products Tested In This Video (in no particular order):
RC Racing Fuel:

Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera:
Canon 70D Camera:
Azden Microphone:
Go Pro Bundle:

? Thank you very much for supporting the channel:
? An easy way to find past videos along with products tested: A big thanks to Jim for putting this together.
? Merch:
? Click here if you’d like to subscribe:
? As an Amazon Associate I earn from qualifying purchases.

This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC


How to Install a Nitro Engine In an Align Helicopter Part.1 By(Holden Mathias)

This is a detailed video of puting in an so 50 Max engine in an align Helicopter i hope this helps Thanks


3D jumping RC Helicopter T-REX 700 Nitro Engine high autorotation landing included

Ramon fly this 3D RC Nitro Helicopter T-Rex 700 N very close on the Ground i have made a close up slow-mo enjoy it….. it was very close on a Crash…
MORE ?? 3D R/C Helicopter??, CLICK HERE:

THANKS to my Partner

My social channels,follow me here:
Video Rating: / 5


SCHWEIZER 300C or Hughes 269B RC Scale Model Helicopter Gas Engine

1. Scale RC Helicopter meeting in Liechtenstein 2019 what a fantastic Organisation and the Club-House was great, Food, Drinks and many more, TOP.
Enjoy this Hughes 269B or Schweizer 300 gas engine Scale RC Helicopter flight in a beautiful Scenery.

THANKS to my Partner

My social channels,follow me here:
Video Rating: / 5

Loorholz RC Helicopter meeting Switzerland 2021
Very nice Cockpit details in this Ecureuile AS350 Scale RC Turbine Model Helicopter, enjoy it.
Best Scale RC Helicopter.
Pilot: Alexandre Piguet
Scale: 1/4
Vario Helicopter, Ecureuil AS350 B3
Turbine Jakadofsky 5000 pro
Rotor-Diameter: 2,50 meter
Weight: 25kg


THANKS to my Partner

My social channels,follow me here:
Video Rating: / 5


Helibug UAV 800 RC Gas Helicopter w/ Saito 4-Stroke Radial Gas Engine – RTF/BNF Only


Helibug UAV 800 RC Helicopter w/ Saito 4-Stroke Radial Gas Engine – Available RTF or BNF Only.

1000ml dual fuel tank capacity
Optional Electric Axial Flux Autostart/DC Generator
Saito 4-Stroke Radial Gas Engine
Compatible with Pixhawk
Video Rating: / 5

The E-Sky 300 V2 fixed pitch RC helicopter is one of the best flying FP RC helis I’ve flown to date! It handles wind much better than most micro FP helicopters currently on the market thanks to the rotor blades and head speed.

Unlike most fixed pitch RC helicopters that use non-symmetrical high lift rotors; the E-Sky’s 300 V2 uses symmetrical rotors like most collective pitch RC helicopters use. These blades are also spinning at higher head speeds. This combination gives the 300 V2 cyclic response similar to collective pitch RC helicopters.

So what’s the catch? Why don’t all FP RC helicopters also use this blade design coupled with higher head speeds? Well, this more aggressive cyclic response will make the 300 V2 harder to fly for newbies. Fixed pitch is where most newcomers to the world of RC helicopters get their start – the 300 V2 is not ideally suited to them. It’s also more complicated to work on with the fuselage over a simple pod & boom design.

It is however a perfect at home yard or indoor flyer for those that already have some RC helicopter flying experience and want a fixed pitch RC helicopter that has some wind handling ability.

The E Sky 300 V2 also looks amazing! One of the best looking fixed pitch micros currently on the market in my opinion with a streamlined F3C style fuselage in Airwolf livery.

The E-Sky 300 V2 has well behaved flight characteristics thanks to an auto-level flybarless flight control system which goes a long way to tame it down. It’s a pleasant and predicable little heli that isn’t over powered and thanks to the innovative belt driven main rotor, is surprisingly quiet.

The E-Sky 300 V2 comes as a ready to fly (RTF) package. It comes in two versions – Mode 1 (throttle on the right) & Mode 2 (throttle on the left). Ensure you choose the correct version at time of checkout if you decide to get one. Both RTF versions are priced at around 0 USD and come with one LiPo flight battery. You’ll also need 4-AA batteries for the radio/transmitter.

E-Sky 300 V2 RTF (ready to fly) RC Helicopter Package:
E-Sky Hobby:

E-Sky 300 V2 OpenTX Setup Video:

My original E-Sky F150 V2 Reviews:

0:00 Howdy Folks
0:59 What’s in the box
7:42 Sizing it up
8:51 Powering it up
13:12 Binding Procedure
14:26 How does it fly
20:11 Safe Flight Time
21:05 Inside the 300 V2

DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RC Helicopter & my channel which helps me keep creating content.

Please consider giving a thumbs up & subscribe if you enjoy the content – thank you & thanks for watching 🙂
Video Rating: / 5


RC Plane Crash | Giant Scale PT-17 Stearman With Moki Radial Engine

This video features an RC Plane Crash with a Giant Scale PT-17 Stearman RC Biplane. The plane has a perfectly tuned Moki Radial Engine.

Visit to learn more about the hobby!

The links in this description are affiliate links. They give me a small commission on sales which helps support the channel and keep it independent:

RC Accessories:
– Spektrum Smart Checker:
– Spektrum IX20 Radio:
– Spektrum AR620 Receiver:

Other Hobbyzone RC Planes:
– Arrows Husky 1800mm PNP STOL RC Plane:
– Arrows BAe Hawk EDF Jet:
– Arrows T-33 EDF Jet:
– Arrows F-86 EDF Jet:
– Arrows F-15 EDF Jet:
– Arrows RC MiG-29 EDF Jet:
– Arrows RC Marlin EDF Jet:
– Arrows T-28 Trojan RC Warbird:
– Arrows P-51 Mustang RC Warbird:
– Arrows F8F Bearcat RC Warbird:
– Arrows Bigfoot RC Plane:

“The PT-17 traces its roots to the Stearman Model 70, built as a private venture to meet a 1934 U.S. Army Air Corps request for a new trainer to replace its aging primary trainer fleet. Re-engined with a Wright J-5 Whirlwind, the design was first ordered by the U.S. Navy in 1935 as the NS-1. Using a Lycoming R-680-5 radial engine and known as the Model 75, the Air Corps ordered the type into production as the PT-13 in 1936. With a variety of engines and designations, the Model 75 went on to become one of the most widely produced and used primary trainers in U.S. military service.

The Model 75 biplane featured a fabric-covered, welded steel tube fuselage and spruce wing construction, and enjoyed a reputation as a simple, cost effective design. Student pilots occupied the front cockpit, while the instructor sat in a rear cockpit with identical controls. Its rugged, forgiving nature made it an excellent primary trainer, providing a relatively safe introduction for pilot trainees into military flight.

The Boeing Aircraft Company bought out the Stearman Company in the middle 1930s, and continued production of the Model 75 for the military. Although built by Boeing, the Model 75 continued to be known as the “Stearman”. In 1940, a Continental R-670-5 engine was fitted to the design to create the PT-17, of which over 3,500 were eventually ordered for U.S. Army service. The plane also enjoyed large U.S. Navy orders as the N2S, and in 1942 both services adopted an interchangeable version as the N2S-5/PT-13D, powered by the Lycoming R-680-17 engine. Demand for the Stearman at the outbreak of World War II outstripped engine supply, so another powerplant, the Jacobs R-755-7, was used on the airframe to create the PT-18.”

#PT17Stearman #RCPlaneCrash #GBLynden
Video Rating: / 5


How to make a RC CAR with 49cc 2-Stroke Engine

In this video, i will make a RC CAR with 49cc 2-Stroke Engine at home.

Thanks for watching, Have a great day !
Video Rating: / 5


RC Sikorsky Aircraft MH 53 Heli Piston Gas Engine with Car Transport flight

RC Sikorsky Aircraft MH 53 Heli Piston Gas Engine with Car Transport flight.

Heli Meeting in Interlaken, Switzerland. MG-Interlaken 20.04.2019

Please Subscribe, Rate, Share and comment. New videos will come soon! RC-Helicopters, RC-Boats, RC-Jets, RC-Cars, RC-Trucks, RC-VTOL’s, RC-Quadcopters, Real Fighter Jets and more! (COPYRIGHT RENE SPRING, SWITZERLAND)
Video Rating: / 5

This week we will be bringing in George Baker of TiredIron Aviation to talk about Roban RC Helicopters (and Heli’s in general)! If you haven’t seen one in person, they truly are a sight to behold and George, who wasn’t an RC Heli pilot a year ago, has taken to them like a moth to the flame. He now owns numerous scale heli’s, a few Robans he can show us and unbox a couple more.

Join us!
Video Rating: / 5


Toro Trimmer Engine for RC heli gasser -1

Video Rating: / 5



THIS TRUCK COSTS 50.00 USD, and comes ready to run with EVERYTHING you need but a battery and fuel. – THIS IS INSANE! There is no way for me to translate the presence this giant MONSTER TRUCK gives off as an aura through your viewing screen. It’s the true meaning of “BEAST”. This is the largest PRODUCTION (meaning ready to purchase), Monster truck mass made, to date. Primal RC is the company that makes this phenomenal engineering marvel. This is the second video I have made since I have got the truck. I have a total of 2 tanks through it.. 3, by the end of this film. The engine is still getting broken in.. and I am running a 40:1 Gas to Oil ratio.. with Castrol 927 as the additive.

I have not modified this truck from stock, other than adjusting the HIGH needle to lean out the engine a bit.

This unique and one of a kind build is the result of 5 years of imagination through to realization! “Dan D”, the Principle founder of the Primal RC company and brand – was and still is – a HUGE FAN of the classic Tamiya Clodbuster MONSTER TRUCKS! He always imagined and dreamed about what it would be like to have a HUGE VERSION of that classic beauty. Two years of building a prototype.. and an additional 3 years of ideation and end product production.. DAN engineered every kids DREAM! This solid axle design can go over anything. All torque, and all Power – all the time.

My good friend EVERETT has come by to check out this MASSIVE MACHINE.. and gives me a hand at assembling it and starting it for the first time. We are both struck by the sheer size of it – and the camera does it no justice. Its a definite “MUST SEE TO BELIEVE” kind of Radio Control Monstrosity!


Standard Features

Six Piece Modular 5mm thick CNC Aluminum chassis
49cc 4 bolt 2 stroke reed valve 2 stroke pull start engine with remote engine kill switch!
Large 12 inch long high volume CNC Aluminum body coil over dual spring shocks
Adjustable aluminum 4 link suspension with steel heim joint ends
Large 78mm Centrifugal Clutch
All Steel HD drive train and double chain driven single speed transfer case with counter rotating drive shafts
5 different interchangeable gear ratios to choose from.
Heavy Duty CNC Aluminum modular Axles
Front and rear CNC cased oil filled torque control differentials for awesome on road or off road performance
Huge 12″x7.5″ High traction tires mounted on 24mm hex bead-lock Nylon rims with inner tire foams
Tuned pipe for maximum performance and sound
Front and Rear Sway bars
Dual Steering Servos with inter grated adjustable servo saver system with steel heim joints
Front and Rear axle mounted mechanical disc brakes
Strong Plastic roll cage and Strong 2 piece Poly carbonate body shell with detailed interior and Raminator Sticker Sheet
Radio controlled reverse feature
Strong CNC Aluminum parts used just about everywhere in this truck!
Ball bearings used throughout the entire vehicle
Large 1200cc Fuel Tank for super long run times (a few hours!)

SUBSCRiBE & “Ring the Bell” ?

“1 Million Views Club”:


RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever – including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of Medic Media Productions Inc.


Custom Search
RC Helis