Posts Tagged ‘Bike’

Cyclone Electric Bike kit 360W motor running on LiPo Helicopter batteries

Cyclone Electric Bike kit 360W motor running on LiPo Helicopter batteries

Cyclone kit with 360W motor. I used RC helicopter batteries to power the bike. They are 2 22.2V, 5AH LiPo batteries run in parallel for 10AH total capacity. These are each at Hobbyking plus shipping. The bike draws about 10.4A at 19.6 mph so roughly 19 miles range according the the math (hills, wind, pedaling matter a lot). Max current with the built-in speed control is 32A. The battery is rated at 200A max so there is no problem there. Battery pack plus charger weighs 1.8 kg. Being able to use the bike’s gears with the motor is a huge plus because you don’t need a powerful motor for hills, just use low gear.

I have owned and ridden hub motor bikes, a Zap friction drive bike, and this Cyclone kit. Overall I like the direct drive hub motors the best because they are so simple, reliable and quiet. However in a hilly area the Cyclone would definitely be better.
Video Rating: / 5

Related

World’s Best FPV EZ* Video! RC Plane Onboard Camera Crash Accident Wind Turbine Heli Bike Funny Car

World’s Best FPV Easystar Video! Live video feed, video from onboard camera gets transmitted in real time to the video goggles. FPV= abbreviation for “First …
Video Rating: 4 / 5

Related

Impressive FPV RC Helicopter Flight Heli Onboard Camera Wind Turbine Almost Crash Accident Bike Car

Very nice FPV heli footage!!! 10th and 11th FPV heli flight Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-18 ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades, 2nd choice Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz transmitter Graupner- JR SMC-19 DS receiver with 1,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and small Lawmate 3 dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory settings Microphone Weight FPV gear: approx. 100 g Powering the FPV gear with the 3s flight battery AUW 969 g Maximum flight time (vibrating, sluggish winging): 10 min. (260 mAh/min energy consumption) Costs: Heli, camera approx. 1000 Euro (extraordinary setup for arduous 3D flight) Altogether approx.? 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….) Typical crash costs:? 50- 300 Euro
Video Rating: 4 / 5

Related

Custom Search
RC Helis