Posts Tagged ‘Wind’
Den RC ERA C189 MD 500 bei leichten Wind geflogen – ein Leichtwindmatrose?
Hier habe ich den Heli bei leichten Wind geflogen. Das mach ich wirklich nicht mehr. So bald sich die Zweige bewegen bleibt der Heli im Hangar. Okay er ist größer wie die anderen. Das könnte etwas entspannter sein.
https://www.banggood.com/custlink/vvGFlyzbkp
#RCERAC189TobiLang
Related
YS-X6 autopilot Zero UAV test wind and mobile control by RC Innovations
Video Rating: / 5
N200PC Jet Ranger with Auto Pilot Sacramento California
( Matt Armenta )
Related
Biggest Wind Turbine: Enercon E-126, FPV RC Helicopter Epic Win Fly Fail Aerial Best Heli muni86 3D
Flying through the world’s biggest wind turbine, ENERCON E-126!!! Also filming Vestas V90, Enercon E-70 and Align T-Rex 550E.
These stunts are only possible with a 3D helicopter, piloted by “The Messiah of FPV helicopters”! 😉
Many thanks to “tpit85” for flying the Align T-Rex 550 in third person view and filming the helicopter. He is flying FPV soon, so check out his channel!!!
35th, 36th, 37th and 38th FPV helicopter flight.
Live video feed, video from onboard camera gets transmitted in real time to the video goggles.
FPV= acronym for “First Person View”
Setup:
Standard Thunder Tiger Mini Titan E325
Aluminum rotor head
Aluminum washout base
ACE RC BLC-40 ESC; Settings: Helicopter mode without governor (Throttle curves), Standard timing, Quick throttle response, No brake, Light discharge protection
Hacker A20-6XL motor without cooling fan (broken at a crash), 15 tooth pinion
Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) or RockAmp 11,1V 3s 2200mAh 30C (193g, but very powerful)
Turnigy 3A Low RF Noise external BEC (UBEC), 6V voltage output
6,3V 2200?F buffer capacitor for the BEC, but not necessary
3x EMAX ES08A analog swash plate servos from BEVRC, 10.5mm servo arm length (shorter servo arm= better resolution!!!)
1x Robbe FS550 BB Carbon Digital Speed tail servo, 8mm servo arm length
Robbe- Futaba GY-520 gyro (F3C flight mode, fast response)
Align 325 PRO rotor blades, they are good enough for soft 3D
Align Tail Rotor Blades for T-Rex 450 (plastic)
Graupner- JR MX-16S, 40 Mhz transmitter (+ emergency booster)
Graupner/JR SMC-19 DS 40 MHz receiver with 1,75m antenna (Lamda/4)
Approx. 2550 rpm headspeed
+11° -10° blade pitch
FPV Setup:
1,3 GHz 400 mW video transmitter from BEVRC (www.bevrc.com) with small Lawmate 3 dBi antenna
Lawmate 1,3 GHz (1.2, 1.3 GHz) video receiver with BEVRC 3 dBi antenna (upper plastic casing removed, should be better for 1280MHz)
Video receiver powered with 11,1V LiPo battery
1,2 or 1,3 GHz transmitters are legal in Austria with Radio (Ham) License between 1240 and 1300 MHz up to 200W
WDR700 (= KPC-DNR700PHB) PAL camera (Sony Super HADII CCD), factory (= default) settings, I’ve tried other settings but default is the best in my opinion
Fat Shark RCV922 Aviator Edition video goggles
Microphone
Weight FPV gear: approx. 100 g
Powering the FPV gear with the 3s flight battery through the EH balancer connector
Ferrite ring (= toroid), 16V 1000µF Capacitor against interference (= LC- filter), the BLC-40 has much more noise than the Kontronik Jazz 40-6-18. I could not see any lines with the Jazz 40!!! But the soft start of the Jazz is not good for autorotations…..
FPV Recording:
Video splitting with a simple Y-cable
Canon MVX200i Mini DV PAL Camcorder (DV-AVI, 720×576, 25 fps)
Deinterlacing with “Alparysoft Deinterlace” (Advanced method, ME search enabled) ,saved with “Cedocida DV Codec” and Virtual Dub
Editing with Corel VideoStudio Pro X4
Compressing with Xvid, Single Pass, Quantizer 2 (approx. 72 MB per minute), MP3 256 kps CBR Stereo (I take PCM 16bit, 48000Hz, Stereo now because Corel VideoStudio Pro X4 has no MP3 option anymore)
This is the best possible quality in my opinion (with this camera, transmitter setup)
AUW 980 g
Maximum flight time (hovering, slow flying): 10 min. (260 mAh/min energy consumption)
Average flight time: 7 min.
Range: approx. 800m with this setup
Costs:
Heli, camera approx. 850 Euro
—————————————————————————————————————-
BEWAG Austrian Windpower Energy Power EVN WEB Potzneusiedl Potzneusiedel World Größtes Windrad Windkraft Anlage Windkraftanlage Windmühle Weltgrößtes Höchstes Stärkstes Parrot AR.Drone 2.0 AR Drone 2 Drohne AR.Drone2.0 Hubschrauber HD Hubi Bundesheer Army World’s Worlds High Wolkenkratzer Österrreich Wien Best Henseleit 3D TDR Rigid Align Three Dee Dubay Skyscrapercity Mikado Logo 500 600 550 400 SE V2 V3 HKIII HK V1 Dubai Bay Sea Potzneusiedl Burgenland Vienna Europe Burj Al Arab Millennium Compilation Hirobo Embla 450 700 600 250 Tuning Protos MSH Schweighofer Lindinger Epic Florido Combo Twin Towers WTC Empire State Building Hong Kong Financial Center Bridge New Piroflip Tic Toc York San Definition Francisco Hochhaus Pyramide Cisco Golden Frankfurt Wall Street Gate Drohnen Flugzeug Ferngesteuert Modell RC R/C Funniest Crash Crashes Fail Fails Accident Through Crane Tall Tallest Wind Turbine Mill Mikrocopter Octocopter Oktokopter Microkopter Mikrokopter Quadrocopter Quadrokopter Tricopter Hero Trikopter Win Wins Hexakopter Hexacopter Go Vulture Bird Sparrow Accident Micro Drones Mikro Enercon E-126 Vestas Live Leak Crash V164 Siemens copter Copter Heli muni86 Kopter Chopper Demag Terex Professional Kran Liebherr Burns Pro brennt TNL Feuer Stürzt um kippt fällt falls tips over Fire Dominique Perrault Donaucity
Video Rating: / 5
Related
Wind Turbine Kills Helicopter!!! Funny FPV RC Heli Crash Accident Fire Vestas Burns Enercon E-66 126
LOL!!!
The heli looks very, very good for getting hit by a wind turbine blade and falling down more than 100 meters!!! No electronics damaged!!! Flying again soon.
The onboard microphone had a loose contact, no motor sound in this video.
29th FPV helicopter flight
Live video feed, video from onboard camera gets transmitted in real time to the video goggles.
FPV= acronym for “First Person View”
Setup:
Standard Thunder Tiger Mini Titan E325
Aluminum rotor head
Aluminum washout base
ACE RC BLC-40 ESC; Settings: Helicopter mode without governor (Throttle curves), Standard timing, Quick throttle response, No brake, Light discharge protection
Hacker A20-6XL motor without cooling fan (broken at a crash), 15 tooth pinion
Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g)
Turnigy 3A Low RF Noise external BEC (UBEC), 6V voltage output
6,3V 2200?F buffer capacitor for the BEC, but not necessary
3x EMAX ES08A analog swash plate servos from BEVRC, 10.5mm servo arm length (shorter servo arm= better resolution!!!)
1x Hitec HS-65 HB analog tail servo, 7.5mm servo arm length
Robbe- Futaba GY-520 gyro (F3C flight mode, fast response)
Align 325 PRO rotor blades, they are good enough for soft 3D
Align Tail Rotor Blades for T-Rex 450 (plastic)
Graupner- JR MX-16S, 40 Mhz transmitter (+ emergency booster)
Graupner/JR SMC-19 DS 40 MHz receiver with 1,75m antenna (Lamda/4)
The Multiplex RX-7 SYNTH DS IPD is defective, it was the reason for the last crash
Approx. 2550 rpm headspeed
+11° -9° blade pitch
FPV Setup:
1,3 GHz 400 mW video transmitter from BEVRC (www.bevrc.com) with small Lawmate 3 dBi antenna
Lawmate 1,3 GHz (1.2, 1.3 GHz) video receiver with BEVRC 3 dBi antenna (upper plastic casing removed, should be better for 1280MHz)
Video receiver powered with 11,1V LiPo battery
1,2 or 1,3 GHz transmitters are legal in Austria with Radio (Ham) License between 1240 and 1300 MHz up to 200W
I’m using channel 9 (1280 MHz)
WDR700 (= KPC-DNR700PHB) PAL camera (Sony Super HADII CCD), factory (= default) settings, I’ve tried other settings but default is the best in my opinion
Fat Shark RCV922 Aviator Edition video goggles
Microphone
Weight FPV gear: approx. 100 g
Powering the FPV gear with the 3s flight battery through the EH balancer connector
Ferrite ring (= toroid), 32V 100µF and 16V 1000µF Capacitors against interference (= LC- filter), the BLC-40 has much more noise than the Kontronik Jazz 40-6-18. I could not see any lines with the Jazz 40!!! But the soft start of the Jazz is not good for autorotations…..
FPV Recording:
Video splitting with a simple Y-cable
Canon MVX200i Mini DV PAL Camcorder (DV-AVI, 720×576, 25 fps)
Deinterlacing with “Alparysoft Deinterlace” (Advanced method, ME search enabled) ,saved with “Cedocida DV Codec” and Virtual Dub
Editing with Corel VideoStudio Pro X4
Compressing with Xvid, Single Pass, Quantizer 2 (approx. 72 MB per minute), MP3 256 kps CBR Stereo
This is the best possible quality in my opinion (with this camera, transmitter setup)
AUW 965 g
Maximum flight time (hovering, slow flying): 10 min. (260 mAh/min energy consumption)
Average flight time: 7 min.
Range: approx. 800m with this setup
Costs:
Heli, camera approx. 850 Euro
Altogether approx. 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….)
Typical crash costs: 50- 300 Euro
Video Rating: / 5
Related
World’s Best FPV EZ* Video! RC Plane Onboard Camera Crash Accident Wind Turbine Heli Bike Funny Car
World’s Best FPV Easystar Video! Live video feed, video from onboard camera gets transmitted in real time to the video goggles. FPV= abbreviation for “First …
Video Rating: 4 / 5
Related
Impressive FPV RC Helicopter Flight Heli Onboard Camera Wind Turbine Almost Crash Accident Bike Car
Very nice FPV heli footage!!! 10th and 11th FPV heli flight Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-18 ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades, 2nd choice Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz transmitter Graupner- JR SMC-19 DS receiver with 1,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and small Lawmate 3 dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory settings Microphone Weight FPV gear: approx. 100 g Powering the FPV gear with the 3s flight battery AUW 969 g Maximum flight time (vibrating, sluggish winging): 10 min. (260 mAh/min energy consumption) Costs: Heli, camera approx. 1000 Euro (extraordinary setup for arduous 3D flight) Altogether approx.? 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….) Typical crash costs:? 50- 300 Euro
Video Rating: 4 / 5
Related
