Posts Tagged ‘Onboard’

Amazing RC FPV Helicopter Onboard Camera Flight Flying Wind Turbine Truck Car Chase Train Low Pass

4th, 5th and 6th FPV helicopter flight. Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Align T-Rex 600 landing skids (weight + 77 g) Kontronik Jazz 40-06-18 ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz transmitter Graupner – JR SMC-19 DS receiver with 1,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and small Lawmate 3 dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory setup Microphone Weight FPV gear: approx. 100 g Powering the FPV gear with the 3s flight battery AUW 1040 g Maximum flight time (hovering, slow flying): 10 min. (260 mAh/min energy consumption) Costs: Heli, camera approx. 1000 Euro (special setup for hard 3D flight) Altogether approx.? 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….) Typical crash costs:? 50- 300 Euro

Related

Impressive FPV RC Helicopter Flight Heli Onboard Camera Wind Turbine Almost Crash Accident Bike Car

Very nice FPV heli footage!!! 10th and 11th FPV heli flight Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-18 ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades, 2nd choice Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz transmitter Graupner- JR SMC-19 DS receiver with 1,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and small Lawmate 3 dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory settings Microphone Weight FPV gear: approx. 100 g Powering the FPV gear with the 3s flight battery AUW 969 g Maximum flight time (vibrating, sluggish winging): 10 min. (260 mAh/min energy consumption) Costs: Heli, camera approx. 1000 Euro (extraordinary setup for arduous 3D flight) Altogether approx.? 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….) Typical crash costs:? 50- 300 Euro
Video Rating: 4 / 5

Related

World’s 2nd Best RC Helicopter Onboard Video! No FPV! Insane 3D Camera Almost Crash Auto Car Heli

“juz70” has shown me a better non-FPV vid. (FPV= First Person View = Flying with video goggles, another class of winging!) I think a RC helicopter onboard video consists of: 1) Picture Quality (Vibrations, …) 2) Editing (Cutting, music,…) 3) Pilot skills (Alan Szabo,….) 4) Location (Grand Canyon, ….) 5) Creativity (Chasing cars, opening fire rockets…) 6) Thrill (High speed humble go through, almost crash….) So if Alan Szabo puts an onboard camera on his heli, flying at a field, you only get ill, but it is not the best onboard video 😉 Footage of “Insane 3D Aerobatics” vid admitted because it got barricaded for many countries- copyrighted song Guns ‘N Roses- Paradise City Music: 1) Seventh– Decide 2) Seventh– Overdose Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-18 Hacker A20-6XL Kokam 2100 11,1V 30C H5 3x Thunder Tiger C1016 1x Futaba S3114 Robbe- Futaba GY-240 Hyperion 325 Carbon Fiber Blades Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz Graupner- JR R16-SCAN Approx. 2800 rpm at head Weight 942 g with bettered FlyCamOne2 Improved FlyCamOne2: Replaced the accu with a 1400 mAh Cell, weighs now 62 g (+21g)

Here’s the Flight Sim page at www.iheartheli.com Hi, Richard here from iheartheli.com. I am of course a desirous rc heli fan. I made up one’s mind to seek and program a flight sim that you could run in a browser window utilizing svg and javascript. Here is what I came up with so far (totally a beta prototype). It was even fun before I appended gravity, so i have appended buttons to turn on/off gravity! Warning it is not easygoing! Not extreamly down-to-earth either yet, but it is difficult and was definitely artful to code. Left stick is keys a,s,d & w, where an and s are rudder, s and w are throttle. Right stick is j,k,l,& i, where j and l are ailerons, i and k are elevator. Be at the ready to append throttle proper away when you turn gravity on! There is no ground so it just starts falling unless you push the w key about 8 times quickly. Also, it starts out nose in. You have to get utilized to nose-in right away. You might desire to spin around it around getting down out. If you misplace track of it you can always reload using the F5 key. Next I have to program an idle-up switch. Check it out dwell. Oh yea, it does not work in firefox, even though I can run it locally using firefox. It seems to run best in Google’s Chrome browser. download chrome! www.google.com It may not work on Internet Explorer without the SVG viewer activeX object from adobe. Here is a link to get it: www.adobe.com Just scroll down the page and happen your running system. Don’t see vista there, vista users may be out of the loop. Here’s the Flight Sim page ..
Video Rating: 4 / 5

Related

Tragic RC Helicopter Crash, Servo Failure Piroflip Onboard Camera Insane 3D Funny Accident Car Heli

Crash caused by a stripped gear of the rear swash plate servo at a Piroflip. No electronics impaired (only 2 servo gears and motor fan). So this crash is really nickel-and-dime (100- 150 Euro) 🙂 Music: Mozart- Requiem Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-18 Hacker A20-6XL Kokam 2100 11,1V 30C H5 3x Thunder Tiger C1016 1x Futaba S3114 Robbe- Futaba GY-240 Hyperion 325 Carbon Fiber Blades Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz Graupner- JR R16-SCAN Approx. 2800 rpm at head Weight 942 g with downed FlyCamOne2 Improved FlyCamOne2: Replaced the accu with a 1400 mAh Cell, weighs now 62 g (+21g)
Video Rating: 3 / 5

Related

Custom Search
RC Helis