Posts Tagged ‘E325’
Performance Test Flight FPV RC Helicopter Heli Chopper Mini Titan E325 Dive High Speed Low FPV UAV
Does an individual know why the heli violently pitched up at the dive? (I had 0° blade pitch all the time) 9th FPV heli flight More compact and lighter landing gear (stock gear as an alternative of T-Rex 600) The helicopter tipped more than at a stupid variety check on the ground with very low head pace before- had to change the flybar and two servo gears The main gear misplaced some teeth but the motor can’t slip so I did not exchange it- you can only listen to the gap at the helicopter sound The blades are grazed at the ideas but no difficulty I have tested the RC range of the heli, it is approx. 600m with activated video clip TX, no motor. RC transmitter height ,5m, antenna showing upwards, heli height 1,5 m, completely flat location with line of sight Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz forty-06-eighteen ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades, 2nd option Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, forty Mhz transmitter Graupner – JR SMC-19 DS receiver with 1,75m antenna (Lamda/four) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video clip transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and little Lawmate three dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory configurations Microphone Weight FPV …
Related
