HOW TO: My first hover and the first hover of my RC helicopter (#13 video)
My first hover and the first hover of my heli.
Heli: Align T-Rex 500 ESP Superior Combo; Futaba 7C 2.4Ghz;
Images: Zigmar Riedtmann;
Pilot: Ismael Riedtmann
Video Rating: / 5
Great news, I started with a 500. Very good heli to learn on as they are very stable
Yes, now I remember, the gain was high. I had to lower the gain to stop the oscillation. Currently the gain is set at 35% (Futaba T7C).
Yes, now I remember… the gain was high. I had to lower the gain to stop the oscillation. Currently the gain is set at 35% (Futaba T7C).
I am using a Futaba T7C. I do not remember the value of the gain set at the time, but I think it was above 50%. Currently the gain is 35% and the tail oscillates a little bit when I use a small battery of 2200mAh. The 2600 and 3000mAh batteries do not have this problem. In the next flight, I'll increase or decrease the gain to see if stops oscillating with the 2200mAh battery.
If you are using a JR controller start at 62 and if the tail wonders, go up 1 at a time till it stops.
I will decrease the gain to see the result. Thanks.
I will decrease the gain to see the result. Thanks.