Dynam E-Razor 250 Pro 6ch Rc Helicopter Review available in 2.4ghz
www.xheli.com –
Video Rating: 4 / 5
www.xheli.com 6 Channel E-Razor 450 Metal RTF Direct-Belt-Drive Brushless 3D 450 Helicopter Fully-Loaded w/ Lipo, Brushless Motor+ESC and 6-Channel Remote
Related
51 Responses to “Dynam E-Razor 250 Pro 6ch Rc Helicopter Review available in 2.4ghz”
Leave a Reply
Custom Search
I have a question. I got the same helicopter. and i crashed it the first day. But it is all fine and nothing is broken. But i was wondering. When you turn that black crank thing in the motor that spins the tail rotor. Are the blades on top of your helicopter ment to spin?
Great videos dude.
As a beginner in this hobby area, this is all new to me.
I flew my Dynam Erazor 450 yesterday. On landing, the tail rotor touched the ground, broke off and sent a piece thru the main rotor, delaminating it.
It was spectacular, and noisy, but the chopper survived without a scratch.
Would you recommend extending the tailfin to avoid tail rotor ground strikes?
I am thinking of doing this as part of the training gear setup.
tail belt broke on 5th flight… 🙁
@earthling1984
Revo mix must be disabled when using Heading hold
Changing the Servo or invreasing the RPM could help
im having problems with my e-razor 250 tail. The tail is head locked very well during hovering, but when I punch the throttle, it drifts out of center. This would cause huge problems when trying to do 3D. The tail servo seems very slow, perhaps that is the problem? Or maybe the Revo settings need adjustment? Any imput on how to fix this?
is it cheaper to build a 250 or 450 ? or is it cheaper to buy assesmbled?
please answer
I can’t believe I ordered something from xheli… but… This 250 size CP helicopter looks cool. I’ve read some forums and heard the servos aren’t that good(so I will replace) and of course I got the receiver ready version so I can put in my own Spektrum RX. Hopefully it flies well…Sadly I don’t really epxect it to…I’ll have unboxing and flight vids once I get it.
how far does it go
@MrJewripper Check out an outlet converter, availabe at local hobby shops as well! -cn
@Kpilot786457 =) Sounds great either way! -cn
@xhelicopter i may get this, or the G2 heli, but i think i will get the g2 anyway.
@sheyla2003 ;D Lol, Sheyla2003! Hey, if you do, be sure to get a mini cam, record your adventure to the moon for me and you better show me the recorded video!!! -cn
@Kpilot786457 Whatever your decision is will be a great one no matter what! -cn
@xhelicopter Does that mean that it can go to the moon? LoL
@xhelicopter Does that mean it can go to where other planets are? lol
@xhelicopter thankks! i may get this, or a falcon 3d, but i most guarantee i will get this.
LMAO 2:46 he called it a 450
@Kpilot786457 That’s awesome, Kpilot786457! We know you’re going to be a pro at rc flying in no time!!! 😀 -cn
might get it once i am a-ok at my sim, im already really good, i just need to work on emergency landings, you know, when the battry dies, or tail rotor fails, stuff like that. member, im only 10 tho.
@Tyetheberious
An hour or so with stock battery.
wow! what an quick heli!
@MrAbombs Thank you for the inquiry! The 2.4ghz allows the heli to go beyond what the eye can see.
Very nice heli.
how far is the transmitter range?
@ElCapo Thank you for all the support as always, Elcapo! You are awesome! =)
If you know anything about RC helicopter flying, then you sure would know that there is nothing fake about this video. Get your facts straight, fool! Xheli.com, you rock!!! Nice flying!
Jet Li, Thanks for the review lol. Im going to buy this now.
Thanks for your kind reply, may i know that in case I will order a set of screwdrivers can you dispatch to Greece? And which will be the cost
@TheAthensWarriors Check out Xheli. com, all screw sets are available as well! -cn
Hello there, since I’m new pilot I’m agree with you that certainly will need the flight sim kit. consequently please be so kind and let me know in which site I can buy this and I will need also some tools such screwdriver etc
Lol at the “balls” shirt tony is wearing, alon with pin and 2 balls.
lol grab your balls
Fantastic video? I am a new electric 450 heli pilot and when I take off my heli spins as much as 60 to 90 rpm when my stick is in the neutral position. When I adjust the trim only one click it’s as if I moved the stick all the way in that direction. How can I reduce the sensitivity of the trim? My rudder is channel 6 and I tried adjusting the sub trims to no avail. How can I reduce the range of correction my trim has only for the rudder as my main blade trim and throttle trim… work fine?
@jefferyjay01 get the e razor
@jefferyjay01 i have been doing the same thing i would recoomend the erazor 450 2.4 ghz version
If I get the 2.4 Ghz can I hook it up to one of my DX6i or can I buy a bnf verison or do I need to buy the remote with it
So the either the fm or 2.4 it comes with carbon fiber blades?
i am ordering one later tonight hopefully and i was wondering which switches i have to swith to make it reverse thrust or whether the throttle stick starts halfway up then if you bring it down below halfway it makes the helicopter fly downwards plz reply!!!
wie lange kann man mit dem anfangs akku fliegen und wie lange lädt er?
how long can you fly with the standart battery and how long need it to load the batterys?
is this a good for first 3d heli
is this good for a first 3d heli?
is this good for a first 3d heli
this guy look’s like thin jet lee 😛
this guy look’s like thin jet li 😛
Get a Dx6i (and receiver) if you get this heli (receiver ready version from Xheli) if you got the money. You’ll be glad that you did! The ERazor does look a little better design than the G2. Plus the erazor has C-Fiber blades and aluminum rotor head and tail.
@xhelicopter From a memeber of their staff!
One more thing. It’s not bashing if it’s true. My big problem with these companies is that they advertise a much higher quality rtf than is delivered. Possibly it would be better to NOT offer rtf’s in this price range. They’re just too dangerous. Untill that happens, I will let newbies know what to expect from these choppers and these companies.
Nothing in a rtf in this price range from these types of companies is worth buying. Cough up the extra cash and go with Align, Thunder Tiger, Horizon…………………
@BluesGuitares
Thanks for the reply, but that really does not remotely answer my question. Maybe you could provide a useful alternative to one of the heli’s I suggested and possibly a vendor instead of just bashing xheli.
@unsc2295 If by noise you mean a certain “whine” then yes. Some chargers will experience a while when charging. If you feel that its at a unbearable level please give our tech support a call
hey i just got one of these but the batter charger make a lot of noise, like nails on a chalkboard and constant high pitched beeps, please tell me this isn’t normal!