RC Helicopters Beginners Guide Part 6
Listed here is the 6th video of A newcomers manual to RC Helicopters. In this video clip you will watch and learn about simple parts of a Nitro RC Helicopter. Feedback and feedback welcome at alishanmao@gmail.com or ali@redcatracing.com Will not neglect to verify www.redcatracing.com http www.rctoyhouse.com and http
Video Score: 4 / 5
Related
23 Responses to “RC Helicopters Beginners Guide Part 6”
Leave a Reply
Custom Search
dont? like your video
Actually the regulator is not regulating the current to the reciever, it is regulating the voltage. The current varies during? the flight depending on servo load and other things. Regarding the governor, the rpm will actally decrease if the load is to high.
This is a very good series.? It compares to an ebook I bought online, but better if you learn like I do…better to watch and hear not just read. Thanks Alishanmao!
Great educational videos Ali? 🙂
Check my starting video guides series on helis and? you will know what are those on helis. Check for Basic controls video
they sure will, and as you can be selective what equipment you install, even the Dx6I can still fly a nitro heli, as well as just about any .60-.90 sized retract and flap equipped plane IF you get your hands on the correct y-cables etc!
Also good over here that my Dx6i holds it’s resale value to almost what? I brought it for brand new in Australia, so if i do upgrade to a Dx8 etc, no real cost to me in the future!
it’s the sme 1 u used in the vid esky …900mah 7.4 v nd u’r vids r gr8 man nd 1 more? ques i noe dere r aileron nd rudder in planes bt where r dey in helis u mentioned abt dem in u’r vids i am goin 2 buy an esky dauphin nd wanted to know abt d aileron nd rudder ….
thnss buddy….. 🙂
yup, for pilots like us, DX6 or DX7 offer tons? of features to safely fly our aircraft.
i have flown clones. they are just as good as real ones if you put in good electronics. you put? cheap electronics that clones come with in to a TREX and see it behave like a clone. its all bout electronics and setup quality
clones are just as good IMO, they are the? same thing. alas the name “clone” I dont know if this is 100% true, I heard it from crazyhelidude.
I’m actually using a Dx6i on my nitro 50 sized heli, as well as my .61 fixed fine trainer.
It’s a great ‘entry level’ radio, plenty of programming/mixing options for the newbie, plus all the security that the DSM2/model match built in systems? offer as far as preventing loss of signal or interference (same as the more expensive specktrum/JR radios use). Having only 6 channels, it will limit my governor selection down the road (Futuaba GV1), but will still fly any plane I want to fly!
lol Ali
I don’t live on the other side of the world, just a few hundred miles? south of you.
But hell that’s alot!
I only have a little more then half of that saved up.
thanks for kind comment , and welcome :D?
kindly check your Chargers? user manual. different chargers have different behavior
Yepp nice post, agree totaly, and I’ve seen people using 1-2k$ helis/airplanes and are still at FM/AM band, I don’t even trust my cheapest heli/plane to fly on anything other than 2,4. I simple cellphone call can ruin your day, vibration in your pocket? = heli upside down on the airfield, happened to me just once and thats moore than enough. For everyone starting out I would recomend Dx6i cheap and “good enough”. from supplied e-sky radio to programable Dx6i, not even a contest there.
Wow did not know that, I have only had good things to say about helifreak, helpful people and and I have always found good tips&tricks there. Never heard anyone say anything bad about that forum. But your word is worth just as much as mine, so I guess people should take some of the things they read with a pinch of salt then, Only thing I? noticed is that the hardcore fans are a little anti to clones, always recomend expensive = good, which isn’t always true in my oppinion.
heyy u uploaded 1 vid of hw 2? charge batt’s cnu tell me if light stops blinking nd becomes constant nd after sme time starts blinking again wat does dat mean ?????????
great video…intro was funny…i thumbs? up this video..learn something new everyday
sweet i cant wait im getting started into heli’s with ur videos i already have been doing cars with your? videos. i live in america so “today” for you is “tonite” for me
uploading today.? basic 4 Channel controls 🙂
when is? part 7?
well I am flying almost every week 😀 3 or? 4 times
yup afterrun oil seems? a good idea