This is one old RC Helicopter
Dates again from the 70’s, is about 50 % made from hand produced components. Would be a frightening thing to fly for positive.
IT WAS THE Third TIME Traveling IN THIS Video! you can charge for sixty-eighty minutes for 13-14 minutes of traveling time! in imply time you can fly with piccoz or do some thing else. I made this video for support, so u know what u buy and how to fly. and I created flight scene into the movie so you could appear how secure it is! I truly advise this heli simply because it is superb for newcomers. I initial experienced a reelly heli but that a single is just broken. if i would change components i had this alloy shark two times -_-! Specification from the merchandise e-book: -Dimentions: 37.5(Length) x eight(Broad) x 17.5(HIGHT) cms -Rechargeable 3.2v Li-Poly (mains adaptor involved) !**! (some men and women mentioned 7.four volts,,, is not true! verify on google!) not that it genuinely issues,,,, -_- -three Channel remote (needs 4 x AA) -Smart RC system minimizes interference from other RC consumers. !**! (absolutly correct!!! my reelly helicopter, had same mhz duration and was considerably disturbed, this one none!!!) -Electricity conserving electrical power cut off !**!(if the heli doen’t rise up in the air will not fuel as well lengthy trough!! is bad for battery!) -Easy hovering performance !**! ( my reelly heli just did not hover at all) -1hour charge provides 15 minutes traveling time. -Suited for ages 14+
Movie Rating: 4 / five
Related
41 Responses to “This is one old RC Helicopter”
Leave a Reply
my dad has itleast 50 (some boxed, some built) ones from 1940s and over XD they are OLLLD but dont judge it by its cover we have a? motor that is gas 100+ and another 200 easily
that vs? the Syma S033G!
Be great to see it fly.
It’s so old it wouldnt surprise me if that transmitter? had valves in it 🙂
Very good. It must be? wonderful to have a relic like that!
transmiter looks? like shuffle bot
Well…….let’s see? her fly!
i would feel very concerned if i had that thing in the air.?
why isn’t he driving his boat.?Must have forgot his cheese..Did he say how much micepower it has..Back in those days you had to place an order for parts at your local pet store with pencil? and paper..With advancements like that you’d be donkey’s butt not to believe science has all the answers to life and creation..Not..But just think we still use those old ideas..That seems to me like flying my Compass 7hv with that old wooden box like transmitter thing..it just doesn’t seem right does it?
Ok if your? remote is made out of wood….XD Hahaha! Yeah thats getting old!
looks like the old vintage dover rc heli gas, at least a 70cc rc heli. its not? a 3d heli but could do minor aerobatics
i think i have an engine for something like that. they guy said it not for a car or truck, but it does have a? similar clutch and flywheel.
old? school!!
wow nice ! do u have the video of it flying ? thanks?
will it fly like it is or do you need a? new engines and other new parts?
would be cool to see? it fly
the starter on it is the same as a old gas car i saw a while ago…. it had foam tires ,? not rubber
that thin is old !!!!!!!
?
partially,? yes
You have to snap off the 2 blades from your Rotor then you are? left with the part that goes on the pin file it down till it fits inside the new houseing of the new tail rotor then use HOT GLUE ! Must be hot glue , super Glue is no good for it. Now once its dry it will fit , You should see that it will respond better in winds and drive forward much better.
oooh well? yeah, i have to buy a new battery aswell lol,,,,
i think i can figure it out when i have the stuff 😉 thanks 4 the tip!
The back rotor blad is really too small? for even light wind , so get a tail rotor off the DH 9053 and with a little work and hot glue you will fine really good results. If you want to know how to do it just email me.
LOL ! which i did actually 😛 ..had to replace a bent flybar and? the props :/
Great! have fun 😉
DON”T CRASH lol joke.
see u around ;-)?
😀 thanks for your help man ! mastered this one…now i am flying a T-Rex 450 V2 clone ..and i am loving it? 🙂
Ersatzteile:
Hier finden Sie? günstige Ersatzteil für viele Helicopter Modelle , ideal nach einen CRASH!
Vieles? stark reduziert. >>> mini-helis.de <<<
yeah the chinese make? those things very unclear,,
Can you use the trim button? try to take of in? a room with enough space.
then when it still spins use the trim buttons to stop it turning. over time in flight you will have to use the trim buttons frequently some small amounts to keep it still.
Try this and if you fail again ask me ok?!
mine seems to spin everytime it takes off …. i have no idea what to? do :/
They could help if they? were not fucking chinese!!!!!
use google my friend! spare parts S006, it will do good i promise, i? found it too!
Servo is not SENSING it’s rotations, but CORRECTING NEGATIVE MOVES, that? is also something else than a gyroscope,
Nope, not a servo m8……. on the axis never a gyro! can’t be on the axis itself i said(unclear). And the stabilizer has the same PRINCIPE? as a gyroscope has, only it has not affection on it’s turning.
and by the way, only the most 4 chnll have a gyroscope (the real 1) in the main cabin. that one senses rotations! this gyro can give opposite commands to the engines. servos are used for directions with helicopters on 4 channels like sideways, and forward.
and it does not have a gyro. a gyro is a servo that alters the rim of the helicopter whilst flying in midair. the helicopter has a stabilizer which is the bar with? the weights situated at the end which balances the plane and pitch of the helicopter. gyros primarily alter the axis rotation which this specific helicopter does not have. bite me
nah thats what i meant. mine des it flipping over too its just if you hold it at like a certain rpm without allowing it to take off? usually does it
check the upper blade section, check if the blades are well connected, if the weights are still there, and the mounting parts onto the middle. if everything looks good, there is another problem. if you TURN left use the remote control buttons to fix this problem.
Else make a video and send it to me to see what is the problem, or you also? could check your warranty.
good luck!
U don’t call anyone gay without a very good reason my friend, watch your steps around here or i make u do watch ur steps.
If a heli MOVES to lefts side, probably bad room (too small) or wrong connection upper blade, or one of the weights is missing.
The engine spinning indeed has never a gyro. but it is adjustable on the remote control.
what he means is that his heli does? not TURN but flips or moves over, bad balance.
learn the difference between words my friend 😉
lol that guys gay. curzonjp you gotta hold the throttle on real low for a bit then go up or just nail it up into the air straight away it? will spin round because it doesn’t have a gyro
hi can any body help when i try to take off the helicopter just flips on? to its left side
Please could you tell me where there is? an online store where I can get replacement parts for this helicopter S006?
A greeting and thanks from Spain
my e-mail is cobelakspain@hotmail.com
Please? could you tell me where there is an online store where I can get replacement parts for this helicopter S006?
A greeting and thanks from Spain
my e-mail is cobelakspain@hotmail.com
Could you please tell me where there is a on-line store where i can get replacement parts for this helicopter S006?
A greeting and? thanks from Spain
my e-mail is cobelakspain@hotmail.com