Esky Honey Bee King 3 RC Helicopter Testing two cameras and DX6i 3rd Flite

Testing out the setup with the DX6i radio and two camera system. Flycamone2 attached to top of my hat.

Beginner Pop-Up’s Honey Bee King v2 RC Helicopter Video #2 3900kv motor 10t Steel Pinion.


Related

20 Responses to “Esky Honey Bee King 3 RC Helicopter Testing two cameras and DX6i 3rd Flite”

  • ZOODUCK:

    hi, nice video idea but… you need to change the angle on your FlyCamOne! (very easy to get wrong with those camera's unfortunately).

    just setup a DX6i for my Honey Bee King 2. found i had to increase the pitch mix to 105% to get enough pitch range. my current pitch curve settings for normal mode are -5, 2, 13 – subject to change once all flight tests are completed. (btw TX in the video is stock Esky 406A).

    would be interested to know what settings you're using in the video.

  • d0p01:

    Thank you

  • messa4:

    oh, that's actually not bad at all. I expected like a honking 8 hour charge for 10 mesealy minutes like some RC's have. Thanks a bunch for replying, and some good piloting of that chopper!

  • messa4:

    oh, that's actually not bad at all. I expected like a honking 8 hour charge for 10 mesealy minutes like some RC's have. Thanks a bunch for replying, and some good piloting of that chopper!

  • HeliPilotFlyer:

    I use Velcro

  • HeliPilotFlyer:

    Yep,.. They'll get you everytime!

  • HeliPilotFlyer:

    With that Heli and a 2100mAH Battery i'd get 14+ Minutes and Charge time using a DN Micro Power Charger is about 50 minutes.

  • messa4:

    How much flying time do you get out of that heli before you have to recharge it? Is it an 8 hour charge for 10 minutes like some RCs are? Please reply

  • servofailure:

    Nice flying. Looked like them dern Florida skeeters were gettin your legs though. :)

  • smoothb10:

    hes a noob he meant first take off and hover

  • HeliPilotFlyer:

    It took about 2-3 days.
    I used the Esky Flight Sim Package for about a week before i received my Heli in the mail which helped a lot. I fly the Trex 450SE v2 now. Much easier and more stable to fly i feel.

  • rayner3838:

    nice, how do you keep it from spinning when you bring it off the ground? Mine always spins when it is rising and did you get yours ready to fly?

  • HeliPilotFlyer:

    That was my Li-Po Alarm Whistle

  • HeliPilotFlyer:

    The was my LED/Li-Po Alarm Whistle that I had installed at the time.

  • TommyVuitton:

    What was that beeping on the final part of the flight?

  • HeliPilotFlyer:

    Yep, Thats a DX-7 Radio and I'm using a 3900 Esky Motor with a 10T Pinion.

  • RenderScope:

    nice transmitter , is it a 2.4ghz one? i was thinking of getting that heli for christmas , would you reccomend it? and are u using a brusless motor in that vid?

  • Rocky Cheung:

    Well I know JR servos will fit in that. I guess you can move onto a nitro now, good luck.

  • mattydred69:

    hi, do you know which futaba servos will fit the king2? you have loads of videos. i bought an oregon scientific bullet video cam off ebay from the us. cant wait til it arrives

  • HeliPilotFlyer:

    07.08.07 0710Hrs Sunday Morning. I've been flying a little over one month now. This is my first RC Helicopter. Video 2 of 2.

Leave a Reply

*

Search
Custom Search
RC Helis