Esky Honey Bee King 3 RC Helicopter Testing two cameras and DX6i 3rd Flite
Testing out the setup with the DX6i radio and two camera system. Flycamone2 attached to top of my hat.
Beginner Pop-Up’s Honey Bee King v2 RC Helicopter Video #2 3900kv motor 10t Steel Pinion.
Related
20 Responses to “Esky Honey Bee King 3 RC Helicopter Testing two cameras and DX6i 3rd Flite”
Leave a Reply
Custom Search
hi, nice video idea but… you need to change the angle on your FlyCamOne! (very easy to get wrong with those camera's unfortunately).
just setup a DX6i for my Honey Bee King 2. found i had to increase the pitch mix to 105% to get enough pitch range. my current pitch curve settings for normal mode are -5, 2, 13 – subject to change once all flight tests are completed. (btw TX in the video is stock Esky 406A).
would be interested to know what settings you're using in the video.
Thank you
oh, that's actually not bad at all. I expected like a honking 8 hour charge for 10 mesealy minutes like some RC's have. Thanks a bunch for replying, and some good piloting of that chopper!
oh, that's actually not bad at all. I expected like a honking 8 hour charge for 10 mesealy minutes like some RC's have. Thanks a bunch for replying, and some good piloting of that chopper!
I use Velcro
Yep,.. They'll get you everytime!
With that Heli and a 2100mAH Battery i'd get 14+ Minutes and Charge time using a DN Micro Power Charger is about 50 minutes.
How much flying time do you get out of that heli before you have to recharge it? Is it an 8 hour charge for 10 minutes like some RCs are? Please reply
Nice flying. Looked like them dern Florida skeeters were gettin your legs though. 🙂
hes a noob he meant first take off and hover
It took about 2-3 days.
I used the Esky Flight Sim Package for about a week before i received my Heli in the mail which helped a lot. I fly the Trex 450SE v2 now. Much easier and more stable to fly i feel.
nice, how do you keep it from spinning when you bring it off the ground? Mine always spins when it is rising and did you get yours ready to fly?
That was my Li-Po Alarm Whistle
The was my LED/Li-Po Alarm Whistle that I had installed at the time.
What was that beeping on the final part of the flight?
Yep, Thats a DX-7 Radio and I'm using a 3900 Esky Motor with a 10T Pinion.
nice transmitter , is it a 2.4ghz one? i was thinking of getting that heli for christmas , would you reccomend it? and are u using a brusless motor in that vid?
Well I know JR servos will fit in that. I guess you can move onto a nitro now, good luck.
hi, do you know which futaba servos will fit the king2? you have loads of videos. i bought an oregon scientific bullet video cam off ebay from the us. cant wait til it arrives
07.08.07 0710Hrs Sunday Morning. I've been flying a little over one month now. This is my first RC Helicopter. Video 2 of 2.