Posts Tagged ‘Train’

Epic WIN….. and FAIL!!! Funny FPV RC Helicopter Crash Accident Landing On Train Heli Stunts Camera

The heli was proud to die at this wonderful stunt…….. Only minimal hurt, I guess “only” a hundred Euro and 12 several hours of function…… 18th FPV helicopter flight Reside video feed, video clip from onboard digital camera will get transmitted in genuine time to the video clip goggles. FPV= acronym for “Initial Person See” Set up: Common Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Kontronik Jazz 40-06-eighteen ESC Hacker A20-6XL motor without having cooling enthusiast (damaged at a crash), 15 tooth pinion Thunder Electrical power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) or RockAmp 11,1V 3s 2200mAh 30C (193g, but really effective!!!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades, 2nd option Align Tail Rotor Blades for T-Rex 450 (plastic) Reinforced tail rotor pushrod, with two one,3mm CFK rods Graupner- JR MX-16S, forty Mhz transmitter (+ emergency booster) Graupner – JR SMC-19 DS receiver with one,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Set up: one,three GHz 400 mW video transmitter from BEVRC (www.bevrc.com) with small Lawmate 3 dBi antenna Lawmate one,3 GHz (one.2, 1.three GHz) video receiver with BEVRC three dBi antenna (higher plastic casing eliminated, need to be better for 1280MHz) Video receiver driven with 11,1V LiPo battery 1,two or one,3 GHz transmitters are legal in Austria with Radio (Ham) License among 1240 and 1300 MHz up to 200W I am utilizing channel 9 (1280 MHz) WDR700 (= KPC-DNR700PHB) PAL camera (Sony Tremendous HADII CCD
Video clip Rating: four / 5

Related

Amazing RC FPV Helicopter Onboard Camera Flight Flying Wind Turbine Truck Car Chase Train Low Pass

4th, 5th and 6th FPV helicopter flight. Setup: Standard Thunder Tiger Mini Titan E325 Aluminum rotor head Aluminum washout base Align T-Rex 600 landing skids (weight + 77 g) Kontronik Jazz 40-06-18 ESC Hacker A20-6XL motor without cooling fan (broken at a crash) Thunder Power 11,1V 3s 20C 2600mAh LiPo battery (weighs only 188 g!) 3x Thunder Tiger C1016 swash plate servos 1x Futaba S3114 tail servo Robbe- Futaba GY-240 gyro BBT Maniac 321 CFK blades Align Tail Rotor Blades for T-Rex 450 (plastic) Graupner- JR MX-16S, 40 Mhz transmitter Graupner – JR SMC-19 DS receiver with 1,75m antenna (Lamda/4) Approx. 2600 rpm headspeed +- 7° blade pitch FPV Setup: 1,3 GHz 400 mW video transmitter and receiver from BEVRC with stock 3 dBi antenna on RX and small Lawmate 3 dBi antenna on TX WDR700 camera (Sony Super HADII CCD), factory setup Microphone Weight FPV gear: approx. 100 g Powering the FPV gear with the 3s flight battery AUW 1040 g Maximum flight time (hovering, slow flying): 10 min. (260 mAh/min energy consumption) Costs: Heli, camera approx. 1000 Euro (special setup for hard 3D flight) Altogether approx.? 2500 Euro (Flight Simulator, transmitter, batteries, charger, video goggles, FPV video recorder….) Typical crash costs:? 50- 300 Euro

Related

Custom Search
RC Helis