Rc-Help.com Flight School Part 6 Blade Tracking

rc-aid.com The subsequent issue you need to have to do is make confident your blades are monitoring properly. When you search at the blades from the facet, you really should only see one particular blade. If you see two you need to have to modify your monitoring. Be confident to mark the blades so you can see the variation among the two so you know what one to modify. I just take a blue and red marker and mark the conclude of 1 blade red, and the other blue. Now, when I spin it up, I can see what blade is reduce or increased. If it is purple it’s excellent, lol. There is a myth you have to examine your monitoring in the air, although in a hover. Even though this is the ideal way lead to it puts strain on the blades. As a new pilot you will far more than possible not have the capability to do this. So, you will have to do the next finest issue. Set the helicopter on a significant table, or better yet, on the ground. DO NOT TIE THE HELICOPTER DOWN! The organic vibration of a helicopter demands to be ready to vibrate out of the helicopter. If you tie it down, it will entice that vibration and could result in hurt to the heli. Every single helicopter has a resonance at a selected rpm that brings about shaking, even the real helis these kinds of as the Blackhawk or the Chinook. As prolonged as it goes absent when you achieve the greater throttle variety, it really is regular. The moment you get a great place to spool up your helicopter, you will want to slowly boost the throttle right up until it can be just to the position of lifting off the ground. Now do you see why you need to have a big table? It will walk all around on you. The moment you get to in which
Video Rating: five / five


Related

One Response to “Rc-Help.com Flight School Part 6 Blade Tracking”

Leave a Reply

*

Custom Search
RC Helis