RC H Blade Pitch Setup

TUTORIAL SERIES – THE DIGITAL PITCH GAUGE IS A SIMPLE YET EFFECTIVE TOOL FOR CALIBRATING ANY COLLECTIVE PITCHED (CP) BLADE ON A FLYBARLESS OR NON-FLYBARLESS R/C HELICOPTER. THIS PITCH GAUGE CANNOT CALIBRATE FIXED PITCHED (FP) BLADES AS FIXED PITCHED BLADES ARE ALREADY FIXED AT A PRE-DETERMINED PITCH.

FOR THE TUTORIAL, WE USED THE 2.4 GHZ WALKERA V450D03 6-AXIS 6-CHANNEL FLYBARLESS BELT CP R/C HELICOPTER AND THE TAROT AP90 DIGITAL PITCH GAUGE.

VISIT US AT: WWW.RTF-HELI.COM


Related

2 Responses to “RC H Blade Pitch Setup”

  • sam hklee:

    Hi,
    What is the purpose of the zero button on the gauge? Do we need to zero the gauge before using it? If so, how is it done?

    sam

  • Gonads1259:

    When building the heli, set the swashplate and linkages to be level at mid throttle pitch stick position. (Also make sure the swash plate is level at bottom and top throttle pitch stick positions too.)

    Switch on the heli & radio and move the throttle pitch stick to mid position. Your swash plate should now be level. Now switch off the heli and radio.

    Use a flybar lock tool to stop the flybar moving then adjust your pitch as required.

Leave a Reply

*

Search
Custom Search
RC Helis