HOW TO: My first hover and the first hover of my RC helicopter (#13 video)

My first hover and the first hover of my heli.

Heli: Align T-Rex 500 ESP Superior Combo; Futaba 7C 2.4Ghz;
Images: Zigmar Riedtmann;
Pilot: Ismael Riedtmann
Video Rating: / 5


Related

7 Responses to “HOW TO: My first hover and the first hover of my RC helicopter (#13 video)”

  • Michael Davies:

    Great news, I started with a 500. Very good heli to learn on as they are very stable

  • Ismael Riedtmann:

    Yes, now I remember, the gain was high. I had to lower the gain to stop the oscillation. Currently the gain is set at 35% (Futaba T7C).

  • Ismael Riedtmann:

    Yes, now I remember… the gain was high. I had to lower the gain to stop the oscillation. Currently the gain is set at 35% (Futaba T7C).

  • Ismael Riedtmann:

    I am using a Futaba T7C. I do not remember the value of the gain set at the time, but I think it was above 50%. Currently the gain is 35% and the tail oscillates a little bit when I use a small battery of 2200mAh. The 2600 and 3000mAh batteries do not have this problem. In the next flight, I'll increase or decrease the gain to see if stops oscillating with the 2200mAh battery.

  • Michael Davies:

    If you are using a JR controller start at 62 and if the tail wonders, go up 1 at a time till it stops.

  • Ismael Riedtmann:

    I will decrease the gain to see the result. Thanks.

  • Ismael Riedtmann:

    I will decrease the gain to see the result. Thanks.

Leave a Reply

*

Custom Search
RC Helis